How to obtain explosion-proof certificate for explosion-proof lamps?
2022-08-11
1. Timing view LED explosion-proof light:
When operators use LED explosion-proof lights, pay attention to the field vision of LED explosion-proof lights. Since such lamps are placed outdoors, they are easily exposed to wind and rain, so the operator should check whether the outer station is damaged by the organized viewing periodic table, whether it is in the case of wiring, or the lamp is not lit. , if there is such a situation, the operator should replace or repair it in time.
2. LED explosion-proof lamp dust removal:
Regularly clean the dust and dirt in the explosion-proof lamp housing to improve the luminous efficiency and thermal performance of the lamp. Wipe with clean water (wipe with a damp cloth) according to the protective capacity of the lamp housing. Switch off the power supply when cleaning the water jet. It is strictly forbidden to wipe the plastic case (transparent) with a dry cloth to prevent static electricity.
3. Safe start and stop to prevent short circuit:
Before turning on the LED explosion-proof light, the operator needs to confirm whether there is a three-hole grounding socket. Since the lamps are mainly installed outdoors, the prevention is very simple. The grounding power supply can prevent the occurrence of short circuits and cause casualties. In addition, when repairing the equipment, turn off the power first for inspection or maintenance.
4. When the operator turns on the LED explosion-proof light, it is necessary to confirm whether there is a three-hole grounded socket. Since the light is mainly installed outdoors, it is easy to prevent, and the grounded power supply can prevent short circuit and cause casualties. In addition, when repairing the equipment, turn off the power first for inspection or maintenance.