new product heat insulation hat for fire

aluminum foil fire retardant heat shield made of heat-resistant aluminum foil composite cloth and pure cotton comfortable lining, and is made of aramid high-temperature flame-retardant stitching. Fire Insulation Hood suitable for firefighters to participate in fire prevention and fire fighting and factories and mines to participate in

Scope of application
Wear for firefighters; can also be used as high temperature workers Protective Rescue Suit
Protective work clothes and those used for escape in case of fire
If the heat insulation cap is dirty after use, it should be scrubbed and used when washing.
Heat Insulation Cap maintenance
Use a soft brush dipped in neutral detergent to scrub the remaining dirt on the surface, and then
Rinse with clean water and hang it in a ventilated place to dry naturally. strict
Water soaking and hammering are prohibited, and baking is strictly prohibited when dry
1. After the heat insulation cap is used, it should be inspected and repaired in time if any problems are found.
2 If it cannot be repaired or the overall protective performance is affected after repair, it shall not be used for
maintain
Access to the job site
3 The repaired hot cap should be inspected by a special person, and can only be entered after passing the inspection.
library, and should be marked in a prominent position of the heat shield