New product industrial dehydrator machine

1. The three-legged pendulum structure is adopted, which can avoid the vibration of the feet during operation due to the unbalanced load in the drum.

2. The inner cylinder and outer shell are made of stainless steel plate material, the drum is made of stainless steel plate, the cage base and the chassis are all cast iron materials, and the water outlet pipe is under the chassis.

3. The main shaft is made of high-quality steel after heat treatment and finishing.

4. The transmission part adopts triangular belt transmission, and the centrifugal starting wheel is directly driven by the motor, which can make the machine start slowly and gradually reach the design speed to ensure the smooth operation of the machine.

5. There is a brake opening and closing arm in the machine, which has good braking performance and can quickly stop the machine.

6. Fewer failures, less noise and vibration, and simple operation

7. Small footprint, easy maintenance and replacement; small weight, easy to handle, not easy to block.

8. The daily maintenance time is short, the maintenance work is simple and durable.

9. The inner tank is made of stainless steel, which can prolong the service life of the equipment.

Dehydrator technical parameters:

Model Type： SS752-600 SS752-800 SS751-1000
Drum diameter： 600 800 1000
Drum height ：300 310 330
Spindle speed： 960 910 900
Motor power (kw)： 2.2 4 5.5
Maximum capacity (kg)： 50 80 130
Dimensions： 1200*1200*680 1450*1450*800 1800*1800*860
Overall weight： 450 760 1100
201 material                           304 material

Industrial Electric Dehydrator Performance: Made of high-quality stainless steel material, it has excellent performance, stable operation and high dehydration rate. Among them, the SME301-150 large-capacity Industrial Dehydrator Machine adopts West German technology and is manufactured according to international standards. The first in China, with the characteristics of large capacity and low energy consumption, Electric Industrial Dehydrator has a complete shockproof, timing, automatic and safety control system.
structure:
The Industrial Dehydrator is generally a three-legged pendulum structure, and the three legs are equipped with springs to avoid vibration caused by unbalanced load. The inner shell is made of stainless steel plate, which is strong and durable. The brake is generally equipped with a brake opening and closing arm, which has good braking performance and is safe and reliable. It is driven by triangular belt, and the motor drives the starting wheel to start slowly to the normal speed, and the operation is stable and without vibration.

Main technical features of industrial dehydrator:
◆It adopts three-legged suspension structure, which has better shock absorption effect.
◆A starting wheel structure is installed under the shaft, and the inner tank is gradually accelerated gradually when starting, so as not to overload the motor.
◆The main components are made of imported high-quality stainless steel, which is durable.
◆The inner tank is balanced and corrected, and the operation is stable, safe and reliable.
◆Stable braking, high dehydration rate and easy operation.
Main technical parameters of industrial dehydrator:
Instructions
(1) Before use, first check whether the mechanical parts are in good condition.
(2) Place the laundry evenly in the inner tumbler.
(3) Start the motor to gradually increase the speed of the inner cage. According to the type of fabric, it usually takes 5-10 minutes to complete the de-drying.
(4) Press the "stop" button to power off the motor. After the dehydrator decelerates naturally for a period of time, the brake handle is operated to perform intermittent braking operation to realize the stop of the inner cage.
(5) After the machine is stopped, the fabric can be taken out.
Precautions for use
(1) Fabrics with different water absorption should be dehydrated separately.
(2) For newly installed dehydrators or newly connected wires, it must be ensured that the motor rotates in the correct direction.
(3) When strong vibration is caused by the serious uneven placement of the fabric, the power switch should be turned off immediately, and the fabric should be placed evenly before dehydration.