High quality firefighter protective boots

Rope Rescue Gloves Fire-fighting and rescue work at general fire sites and accident sites.
It cannot provide effective protection for chemical accident sites with strong corrosive liquids and gases; accident sites with strong penetrating military poisons and biological viruses; live accident sites, etc.
Firefighter Extrication Gloves Structural features:
Firefighter fire protection boots are mainly composed of outsole and boots. The entire boot has a multi-layer construction.
The boot is equipped with a steel toe cap to improve anti-smashing performance. inside and outside the toe head
There are insulating rubber layers, sponge comfort layers, insulating paper, foam comfort layers and cotton wool linings, etc., which are both insulating and comfortable to wear.
The outsole is equipped with a steel plate bottom to improve puncture resistance. There are rubber insulating layers, insulating paper, foam comfort layers and cotton wool linings on the upper and lower sides of the steel plate bottom.
Chemical resistant gloves logo is printed on the right side of the boot, which contains information such as the manufacturer and the adopted standard. Technical performance:
personal protection
Anti-smashing performance: After the boot toe has passed the 10.78KN static pressure test and the impact test with an impact hammer mass of 23KG and a drop height of 300mm, the clearance height is >15mm.
The mass is less than 2.5Kg.
It has puncture resistance, cutting resistance, radiation heat penetration resistance, electrical insulation, waterproof, anti-skid, anti-smashing, general acid and alkali resistance, and heat insulation properties.
In line with GA6-2004 < firefighter fire protection boots) standard.